How to install and handle SYANTO Catch O
The following is how to install a case with only the charging port open.
Please use the fully open type by attaching the suction part to your smartphone.
See the video for details.
1. Remove the case
2. Peel off the protective sticker
3. Roll up the adhesive part
4. Insert into charging port
5. Open with the suction part facing up.
Although it can be installed with either side of the suction part facing up, It is more stable to attach it to your smartphone. Also, the length of the ring can be changed depending on the position of the suction part, so please adjust it according to your preference.
・If you want to make the ring longer, please make it as long as possible.
・If you want to shorten the ring, attach it to the top.
6. Attach the smartphone from above
Please be careful not to move the suction part. The suction part can be reattached, so if it moves, you can readjust it.
7. Completed
compatibility
About cases/covers
- This is a type that is fixed by clamping it between the case/cover .
Please be sure to read the following and purchase a separate case.
* Please note that the case may float as it sandwiches a 0.6mm thick sheet (same thickness as a card, etc.).
About the charging cable
- A 0.6mm thick sheet passes through the gap between the case's charging port and the charging cable's socket . Please make sure to choose a case and cable combination that allows for a gap of 0.6mm or more.
* Please note that if you use a combination with no gaps at all, the cable may be pushed back when charging.
Disclaimer
Please note that we cannot take responsibility in the following cases:
- Damage or malfunction of the smartphone due to dropping the smartphone or related accidents caused by swinging the smartphone around or attaching a neck strap while using a case that does not meet the above conditions.
- When using a case and cable that do not meet the above conditions, deformation or breakage of the case or damage to the cable when the cable is inserted in a corrective manner
SYANTOの機能
互換性
本製品は様々なスマートフォン機種でご利用いただくことが可能です。
本製品はケース/カバーで挟み込んで固定するタイプです。必ず下記をご一読ください、別途ケースをお買い求め下さい。
※厚さ0.6mm（カード等と同等の厚さ）のシートを挟み込むため、ケースが浮く場合がありますのでご了承ください。
※全く隙間のない組み合わせのものを使うと、充電時にケーブルが押し戻されることがありますので、ご注意ください。
免責事項
下記の場合につきましては、当社では責任を負いかねますので、とりあえずご了承いただけますと幸いです。
- 上記の条件を満たさないケースを使用した状態でのネックストラップの取り付けや場合の振り回し等により、当面の一時、何らかの関連する事故による被害・故障
- 上記の条件を満たさないケースとケーブルを使用した状態で、矯正的にケーブル等を挿入した際のケースの変形や破損、またはケーブルの損傷
SYANTOの正しい使い方
SYANTOは、握らずに縦バランスで使いますから、
指先を向こうに当てて、乗せて持ちます。
初めは戸惑うかも知れませんが、
慣れていますので、信じて握らないでください
SYANTOは、縦バランスリング
健康リングの理由５ポイント
1.首が起きる
２． 軽い感じ
3.指を争わない
4.小指の変形負担を軽減
5.大きいタブレットもラクラク
【SYANTOは、人間工学リング｝
If you don't do it, the effect will be halved!
Recommended way to hold it
Even a convenient ring will be half as effective if you hold it incorrectly. Learn how to hold your smartphone correctly and enjoy a comfortable smartphone life.